Peavey 6505 1992 Original 120-Watt Tube Amp Head - 30th Anniversary | No Limit Guitar Co, Idaho Falls
The Peavey 6505 1992 Original is a faithful, full-power re-creation of one of the most influential high-gain amplifiers ever built — the amp that defined the sound of metal, hardcore, and hard rock for the past three decades. Released to mark the 30th anniversary of the original 6505, this 120-watt tube head is loaded with 5 x 12AX7 preamp tubes, 4 x 6L6GC power tubes, and a custom-designed output transformer engineered to accurately reproduce the early-'90s circuit that made the 6505 a legend. Available now at No Limit Guitar Co in Idaho Falls, this is the real thing.
Product Overview
The 6505 1992 Original is built to full arena-ready spec — 120 watts of 6L6GC-powered output driving 4, 8, or 16-ohm cabinets, housed in a head cabinet that measures 26.63" wide and weighs 48.3 lbs. The custom-built output transformer is central to the authenticity of this re-creation, capturing the specific low-end tightness and harmonic character that made the original 6505 circuit so beloved among high-gain players. This is not a reissue built to a price point — it's a deliberate, accurate reconstruction of a classic.
Two footswitchable channels — Rhythm and Lead — cover the full tonal range the 6505 is known for. A shared 3-band EQ handles foundational tone shaping, while Presence and Resonance controls in the power section let you fine-tune the amp's response and low-end feel. Per-channel Pre-Gain and Post-Gain controls give you extensive gain staging flexibility across both channels, from glassy cleans to full saturation.
The Rhythm channel goes beyond a simple clean platform with the addition of Bright and Crunch switches. The Bright switch adds clarity and top-end definition, while the Crunch switch takes the channel from clean to a throaty, mid-gain grind — covering the classic Burn My Eyes-style rhythm tones the original 6505 is famous for. A Preamp Out jack allows easy slaving to a second amplifier, and a full effects loop integrates your pedalboard and external processors cleanly into the signal chain.
Ideal For
- Metal, hardcore, and hard rock guitarists seeking the authentic original 6505 high-gain tone
- Players who want a spot-on re-creation of the early-'90s classic 6505 circuit at full 120-watt power
- Touring and gigging musicians who need a stage-proven, arena-ready tube amp head
- Collectors and enthusiasts looking for the 30th Anniversary Peavey 6505 1992 Original
- Guitarists in Idaho Falls and beyond searching for one of metal's most iconic amplifiers
Key Features
Authentic 1992 Circuit Re-Creation Peavey built the 6505 1992 Original around the same topology as the early-'90s original, including a custom-designed output transformer engineered specifically to reproduce the tightness, punch, and harmonic character of the classic circuit. This is as close as you can get to the original without finding a vintage unit.
5 x 12AX7 Preamp / 4 x 6L6GC Power Section The full complement of five 12AX7 preamp tubes feeds into a quad of 6L6GC power tubes — the same tube configuration responsible for the 6505's legendary combination of aggressive preamp saturation and tight, controlled low-end power response.
Per-Channel Pre-Gain and Post-Gain Controls Independent Pre-Gain and Post-Gain knobs on both the Rhythm and Lead channels give you granular control over gain staging, allowing you to balance preamp saturation against power section drive with a level of precision rarely found on two-channel heads.
Rhythm Channel Bright and Crunch Switches The Crunch switch transforms the Rhythm channel from a clean platform into a mid-gain grind — ideal for chunky rhythm work without engaging the full Lead channel. The Bright switch adds top-end presence and definition for clean tones that cut through the mix.
Preamp Out and Effects Loop The Preamp Out jack makes slaving a second amplifier straightforward, expanding your stage or studio rig without additional hardware. The full effects loop keeps time-based effects and processors in the optimal position in the signal chain with minimal tonal compromise.
What's Included
- Peavey 6505 1992 Original 120-Watt Tube Amp Head
- 2-Button Footswitch (Rhythm/Lead & Effects Loop)
- Standard IEC AC power cable
- Peavey manufacturer warranty
Technical Specifications
| Specification | Details |
|---|---|
| Type | Tube |
| Channels | 2 (Rhythm, Lead) — Footswitchable |
| Output Power | 120 Watts |
| Preamp Tubes | 5 x 12AX7 |
| Power Tubes | 4 x 6L6GC |
| EQ | Shared 3-Band (Bass, Mid, Treble) |
| Power Section Controls | Resonance, Presence |
| Gain Controls | Per-Channel Pre-Gain & Post-Gain |
| Rhythm Channel Switches | Bright, Crunch |
| Speaker Impedance | 4, 8, 16 Ohm |
| Inputs | 2 x 1/4" (Normal, High Gain) |
| Outputs | 2 x 1/4" Speaker (4/8/16 Ohm), 1 x 1/4" Preamp Out |
| Effects Loop | Yes |
| Footswitch I/O | 1 x 1/4" (Rhythm/Lead, Effects Loop) |
| Footswitch Included | Yes, 2-Button |
| Power Source | Standard IEC AC Cable |
| Height | 10" |
| Width | 26.63" |
| Depth | 11.75" |
| Weight | 48.3 lbs |
| MPN | 03619250 |
Get Your Hands on This Peavey 6505 1992 Original Today
Stop by No Limit Guitar Co in Idaho Falls to plug into the Peavey 6505 1992 Original and hear three decades of high-gain legacy firsthand. Want to check availability or have questions about the amp? Reach out through our website or come see us in store — our team is ready to help you find your tone.
