Hosa DMX-505 DMX512 Cable – 5-Pin XLR5M to XLR5F | 5 ft. (2-Pack) | No Limit Guitar Co, Idaho Falls
This purchase includes two 5-foot DMX cables — a tremendous deal for anyone who needs short DMX runs between fixtures or controllers.
The Hosa DMX-505 is a professional-grade DMX512 lighting control cable built for years of dependable service — and this listing includes two 5-foot cables for the price. With 110-ohm impedance, 24 AWG oxygen-free copper conductors for enhanced signal clarity, and a hi-density OFC braided shield for superior EMI and RFI rejection, the DMX-505 is correctly specified for the DMX512 standard. XLR connectors with internal strain relief provide rugged reliability through repeated connection cycles, and Hosa's limited lifetime warranty backs every cable they make. Short 5-foot runs are ideal for tight fixture-to-fixture daisy-chaining, compact stage setups, and any DMX application where a longer cable would create unnecessary slack.
Product Overview
DMX512 lighting control requires correctly specified cabling to function reliably — and the most common mistake in DMX installations is using standard microphone XLR cables rather than purpose-built DMX cable. The critical difference is impedance: standard microphone cables are typically 50–75 ohms, while the DMX512 standard specifies 110-ohm cabling. Using incorrectly specified cable can introduce signal reflections and data corruption that causes unpredictable lighting behavior, missed cue responses, and erratic fixture control. The DMX-505's 110-ohm impedance ensures the signal transmits cleanly and correctly from controller to fixture or between fixtures in a daisy-chain, eliminating this common source of DMX system problems.
The 24 AWG oxygen-free copper conductors provide the signal clarity advantage that OFC construction is known for — eliminating the oxygen impurities in standard copper that can cause oxidation and signal degradation over time, maintaining consistent transmission quality across the cable's full service life. The hi-density OFC braided shield provides comprehensive protection against electromagnetic interference and radio frequency interference, which is particularly valuable in live performance environments where power cables, wireless equipment, and other electronic sources can corrupt DMX control signals and cause unplanned lighting behavior during a performance. Internal strain relief at both XLR connectors absorbs the mechanical stress of repeated connection and disconnection, extending the connectors' service life beyond what unrelieved connectors can provide under regular stage use.
Five-foot cables occupy a specific and practical niche in DMX system builds — short enough to keep cabling tidy and eliminate slack between closely positioned fixtures or controllers, long enough to reach across a lighting bar or between adjacent fixtures in a rig. Receiving two cables per purchase makes this an especially practical value for anyone building or expanding a DMX-controlled lighting setup.
Ideal For
- Lighting technicians and stage riggers who need short, tidy DMX cable runs between closely positioned fixtures in a daisy-chain
- Musicians and bands who control their own stage lighting and want correctly specified 110-ohm DMX cable that won't cause signal errors
- Venue installers and lighting designers who need compact DMX cable runs between fixtures mounted close together
- Home studio and content creators building DMX-controlled lighting setups who want professional cable quality in short, manageable lengths
- Lighting professionals in Idaho Falls looking for a great-value 2-pack of 5-foot Hosa DMX cables backed by a limited lifetime warranty
Key Features
2-Pack — Two 5-Foot Cables Per Purchase
Two complete 5-foot DMX512 cables included — a practical value for anyone who needs multiple short runs in a lighting rig or wants a spare on hand.
110-Ohm Impedance — Correct DMX512 Specification
Purpose-built DMX cable with the correct 110-ohm impedance specification — prevents the signal reflections and data corruption that occur when standard microphone cables are incorrectly used in DMX applications.
24 AWG Oxygen-Free Copper Conductors
OFC conductors eliminate oxidation-causing impurities in standard copper, maintaining enhanced signal clarity across the cable's full service life.
Hi-Density OFC Braided Shield
Comprehensive EMI and RFI shielding protects the DMX control signal from interference in live performance and studio environments.
XLR Connectors with Internal Strain Relief
Internal strain relief at both connectors absorbs mechanical stress from repeated connection and disconnection cycles for rugged, long-lasting reliability.
5-Pin XLR Configuration (Pins 4 and 5 Not Wired)
Standard 5-pin DMX512 wiring configuration compatible with all standard 5-pin DMX equipment.
Hosa Limited Lifetime Warranty
All Hosa cables and adapters are covered by a limited lifetime warranty from one of the industry's most trusted connectivity manufacturers since 1984.
What's Included
- Hosa DMX-505 DMX512 Cable, 5-Pin XLR5M to XLR5F, 5 ft. (2-Pack — Two Cables)
- Free standard shipping
Technical Specifications
| Specification | Details |
|---|---|
| Model | DMX-505 |
| Quantity | 2-Pack (Two 5-Foot Cables) |
| Cable Type | DMX512 |
| Connectors | XLR5M to XLR5F (5-Pin) |
| Wired Pins | Pins 1, 2, 3 (Pins 4 and 5 Not Wired) |
| Impedance | 110 Ohms |
| Conductor Gauge | 24 AWG |
| Conductors | 2× OFC (Oxygen-Free Copper) |
| Shield | Hi-Density OFC Braided |
| Length | 5 Feet (Per Cable) |
| Warranty | Limited Lifetime |
| Manufacturer Part # | DMX-505 |
Get Your Hands on This DMX Cable 2-Pack Today
The Hosa DMX-505 DMX512 Cable 2-Pack is available now at No Limit Guitar Co in Idaho Falls. Stop in to pick up a set or reach out online to order yours — two professionally specified 5-foot DMX cables, correctly built for the DMX512 standard, at a tremendous value.
